TCPA404XL-美国泰克TCP404XL电流探头_TCPA404XL,泰克电流放大器,Tektronix电流放大器_供应信息_91化工仪器网

美国泰克TCP404XL电流探头的详细介绍：www.chem17.com/st240071

Features Benefits AC/DC Measurement Capabilities DC 100 MHz, Current Probe Amplifier （TCPA300） uses: DC 100 MHz, 30 A DC （TCP312） DC 50 MHz, 50 A DC （TCP305） DC 15 MHz, 150 A DC （TCP303） DC 50 MHz, Current Probe Amplifier （TCPA400） Uses: DC 2 MHz, 750*1 A DC （TCP404XL） （500 A DC Continuous） Automatic Scaling and Units*2 Oscilloscope On-screen Readout of Magnitude and Amps reduces Measurement Errors with No More Hand Calculations AC/DC Input Coupling Low Insertion Impedance reduces Device Under Test Loading Split-core Construction allows Easy Circuit Connection Status Indicators provide Visual Operating Status and Notification of Potential Error Conditions Degauss, Probe Open, Overload, Not Terminated into 50 ?, Noncompatible Probe Type Lower DC Drift and Noise allows Improved Low-level Current Measurements Certified for use in U.S., Canada, and Europe. Complies with applicable IEC Standards.Applications Development and Analysis Solutions for Designers, Installers, and Service Personnel in ecomm, Data Comm, Computer, and Semiconductor Power Electronics Environments for: Power Supplies （Switching and Linear） Semiconductor Devices （SCRs, IGBTs, MOSFETs, CMOS, BJTs） Power Inverters/Converters Electronic Ballasts Industrial/Consumer Electronics Communications （Phone, Salite, Relay Stations） Motor Drives Transportation Systems （Electronic Vehicles, Electric Trains, Locomotives, Avionics） Increased Performance and Simplicity

The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today's current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect （w/ TCA-BNC）, or TekVPI （w/ TPA-BNC） interfaces, current measurements and calculations are simple and easy.

*1 Derated with duty cycle.

*2 Requires a TDS TEKPROBE oscilloscope or a TekConnect oscilloscope with TCA-BNC.

Meets Today's AC/DC Current Measurement Applications

The TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30 A, 50 A, and 150 A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500 A DC continuous and 750 A DC continuous, derated with duty cycle.

Higher frequency performance is available with the TCP312 w/TCPA300 providing 100 MHz bandwidth and a maximum current of 30 A DC.

Measurement Errors and Manual Calculations are Now a Thing of the Past

With this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS500, TDS600, TDS700, TDS5000, TDS6000, and TDS7000B Series oscilloscope systems （the DPO3000, DPO4000, and DPO7000 Series oscilloscopes, the TPA-BNC adapter is required）.

The TCP300/TCP400 current measurement systems seamlessly integrate with your TDS Series oscilloscope.