当前位置: 首页 » 新闻资讯 » 厂商 » 正文

汽车连接器的国家标准和行业标准是?-技术文章-广东宏展科技有限公司

分享到:
放大字体  缩小字体    发布日期:2019-09-02  来源:仪器信息网  作者:Mr liao  浏览次数:174
核心提示:技术文章 汽车连接器的国家标准和行业标准是? 阅读:3571发布时间:2018/5/28 文献号 中文题名 英文题名 GB/T 1332-1991 载货汽车定型试验规程 Trucks--Engineering approval evaluation program GB 1495-2002 汽车加速行驶车外噪声限值及测量方法 Limits and measurement methods for noise emitted by accelerating motor vethicles GB/T 2977
技术文章 汽车连接器的国家标准和行业标准是? 阅读:3571 发布时间:2018/5/28

文献号

中文题名

英文题名

GB/T 1332-1991

载货汽车定型试验规程

Trucks--Engineering approval evaluation program

GB 1495-2002

汽车加速行驶车外噪声限值及测量方法

Limits and measurement methods for noise emitted by accelerating motor vethicles

GB/T 2977-1997

载重汽车轮胎系列

Series of truck tyres

GB/T 3273-2005

汽车大梁用热轧钢板和钢带

Hot-rolled steel plates(sheets)and strips for auto frames

GB/T 3487-2005

汽车轮辋规格系列

Rim contours for motor vehicles

GB/T 3730.1-2001

汽车和挂车类型的术语和定义

Motor vehicles and trailers-Types-Terms and definitions

GB/T 3730.3-1992

汽车和挂车的术语及其定义 车辆尺寸

Motor vehicles and towed vehicles--Dimensions of vehicles--Terms and definitions

GB/T 3798.1-2005

汽车大修竣工出厂技术条件 第1部分;载客汽车

Technical requirements for completion and acceptance of vehicle overhaul Part 1:Passenger vehicle

GB/T 3798.2-2005

汽车大修竣工出厂技术条件 第2部分;载货汽车

Technical requirements for completion and acceptance of vehicle overhaul Part 2:Goods vehicle

GB/T 3799.1-2005

商用汽车发动机大修竣工出厂技术条件 第1部分;汽油发动机

Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 1:Gasoline engines

GB/T 3799.2-2005

商用汽车发动机大修竣工出厂技术条件 第2部分;柴油发动机

Technical requirements for completion and acceptance of commercial vehicle engines overhaul Part 2:Diesel engines

GB 3847-2005

车用压燃式发动机和压燃式发动机汽车排气烟度排放限值及测量方法

Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E.

GB/T 4094.2-2005

电动汽车操纵件、指示器及信号装置的标志

Electric vehicles-Symbols for control,indicators,and l-tales

GB 4094-1999

汽车操纵件、指示器及信号装置的标志

Motor vehicles--symbols for controls,indicators and l-tales

GB/T 4095-2005

商用汽车辐板式车轮在轮毂上的安装尺寸

Disc wheels for trucks.Dimensional characteristics of attachment on hub

GB/T 4352-1984

载货汽车运行燃料消耗量

Fuel consumption for trucks in operation

GB/T 4353-1984

载客汽车运行燃料消耗量

Fuel consumption for passenger vehicles in operation

GB/T 4501-1998

载重汽车轮胎耐久性试验方法 转鼓法

Endurance test for truck and bus tyres--Drum method

GB 4599-1994

汽车前照灯配光性能

Photometric characteristics of headlamps for motor vehicles

GB 4660-1994

汽车前雾灯配光性能

Photometric characteristics of front fog lamps for motor vehicles

GB/T 4780-2000

汽车车身术语

Terms for motor vehicle body

GB 4785-1998

汽车及挂车外部照明和信号装置的安装规定

Prescription for installation of the external lighting and light signalliug devices for motor vehicles and their trailers

GB/T 4970-1996

汽车平顺性随机输入行驶试验方法

Method of random input running test--Automotive ride comfort

GB/T 4971-1985

汽车平顺性名词术语和定义

Terms and definitions--Automotive ride comfort

GB/T 5137.1-2002

汽车安全玻璃试验方法 第1部分;力学性能试验

Road vehicles-safety glazing materials--Test methods for mechanical properties

GB/T 5137.2-2002

汽车安全玻璃试验方法 第2部分;光学性能试验

Road vehicles-safety glazing materials-Test methods for optical properties

GB/T 5137.3-2002

汽车安全玻璃 试验方法 第3部分;耐辐照高温潮湿燃烧和耐模拟气候试验

Road vehicles-safety glazing materials--Test methods for resistance to radiation,high temperature,humidity,fire and simulated weathering

GB/T 5137.4-2001

汽车安全玻璃太阳能透射比测定方法

Road vehicles--Safety glazing materials--Method for the determination of solar transmittance

GB/T 5181-2001

汽车排放术语和定义

Automotive emission-Terms and definitions

GB/T 5335-1985

汽车制动装置液压试验的连接器

Auto hydraulic pressure test connection for braking equipment

GB/T 5337-1985

汽车电器、灯具和仪表名词术语

Nomenclature and terminology for automotive electrical equipment, lighting and instrumentation

GB/T 5620-2002

道路车辆 汽车和挂车 制动名词术语及其定义

Road vehicles--Braking of automotive vehicles and their trailers--Vocabulary

GB/T 5624-2005

汽车维修术语

Motor vehicle maintenance and repair terms

GB/T 5671-1995

汽车通用锂基润滑脂

General purpose lithium base grease for auto

GB 5763-1998

汽车用制动器衬片

Brake linings for autos

GB/T 5764-1998

汽车用离合器面片

Clutch facings for autos

GB/T 5845.2-1986

城市公共交通标志 公共汽车标志

Marks for urban public transport--Mark for bus

GB/T 5845.7-1986

城市公共交通标志 城市出租汽车标志

Marks for urban public transport--Identification mark for taxi

GB/T 5845.11-1986

城市公共交通标志 公共汽车、无轨电车、有轨电车站牌

Marks for urban public transport--Stop board of bus and trolleybus and tram car

GB/T 5845.13-1989

城市公共交通标志 公共汽车、无轨电车、有轨电车路牌

Marks for urban public transport Line number plate of bus trolleybus and tram

GB/T 5902-1986

汽车平顺性脉冲输入行驶试验方法

Method of pulse input running test--Auto ride comfort

GB/T 5909-1995

载货汽车车轮性能要求和试验方法

Performance requirements and test methods of truck wheels

GB 5920-1999

汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能

Photometric characteristics of front and Rear position lamps,end-outline marker lamps and stop lamps for motor vehicles and and their trailers

GB/T 5921-1986

汽车和挂车 气压制动系部件上接口的识别标记

Motor vehicles and towed vehicles--Air braking systems--Identification of connections on units

GB/T 5922-1986

汽车和挂车 气压制动装置压力测试连接器

Motor vehicles and towed vehicles--Pressure test connection for compressed-air pneumatic braking equipment

GB/T 5923-1986

汽车柴油机燃油滤清器的试验方法

Test methods of fuel filters for automotive compression ignition engines

GB/T 6068.1-2005

汽车起重机和轮胎起重机试验规范 第1部分;一般要求

Test code for truck crane and crane Part 1:General requirements

GB/T 6068.2-2005

汽车起重机和轮胎起重机试验规范 第2部分;性能试验

Test code for truck crane and crane Part 2:Performance test

GB/T 6068.3-2005

汽车起重机和轮胎起重机试验规范 第3部分;结构试验

Test code for truck crane and crane Part 3:Structure test

GB/T 6323.1-1994

汽车操纵稳定性试验方法 蛇行试验

Controllability and stability test procedure for autos- Pylon course slalom test

GB/T 6323.2-1994

汽车操纵稳定性试验方法 转向瞬态响应试验(转向盘转角阶跃输入)

Controllability and stability test procedure for autos- Steering transient response test (Steering wheel angle step input)

GB/T 6323.3-1994

汽车操纵稳定性试验方法 转向瞬态响应试验(转向盘转角脉冲输入)

Controllability and stability test procedure for autos-Steering transient response test (Steering wheel angle pulse input)

GB/T 6323.4-1994

汽车操纵稳定性试验方法 转向回正性能试验

Controllability and stability test procedure for autos-Returnability test

GB/T 6323.5-1994

汽车操纵稳定性试验方法 转向轻便性试验

Controllability and stability test procedure for autos-Steering efforts test procedure

GB/T 6323.6-1994

汽车操纵稳定性试验方法 稳态回转试验

Controllability and stability test procedure for autos-Steady static circular test procedure

GB/T 6327-1996

载重汽车轮胎强度试验放方法

Strength test method for truck and bus tyres

GB/T 6726-1986

货运汽车用冷弯型钢尺寸、外形、重量及允许偏差

Cold forming sectional steel for cargo vehicle--Dimension, form, weight and permissible deviations

GB/T 6727-1986

客运汽车用冷弯型钢尺寸、外形、重量及允许偏差

Cold forming sectional steel for passenger vehicle--Dimension, form, weight and permissible deviations

GB/T 7035-1993

轻型载重汽车轮胎高速性能试验方法 转鼓法

High speed performence test for light truck tyres.Drum method

GB 7036.1-1997

充气轮胎内胎 第1部分;汽车轮胎内胎

Inner tube of pneumatic tyres--Part 1: Inner tube of auto tyres

GB 7063-1994

汽车护轮板

The wheel guards of motor vehicles

GB 7128-1986

汽车气压制动胶管

Rubber hose for automotive air brake system

GB 7524-1987

汽车液压制动橡胶皮碗

Hydraulic brake rubber cups for autos

GB 8410-2006

汽车内饰材料的燃烧特性

Flammability of automotive interior materials

GB 9656-2003

汽车安全玻璃

Safety glazing materials for road vehicles

GB 9744-1997

载重汽车轮胎

Truck tyres

GB/T 10414.2-2002

带传动 同步带传动 汽车同步带轮

Belt drives--Synchronous beltdrives--Automotive pulleys

GB/T 10716-2000

汽车同步带物理性能试验方法

Synchronous belt drives-Automotive belt-Determination of physical properties

GB 11340-2005

装用点燃式发动机重型汽车.曲轴箱污染物排放限值及测量方法

Limits and measurement methods for crankcase pollutants From heavy-duty vehicles equipped with P.I engines

GB/T 11545-1996

汽车V带疲劳试验方法

V-belt drives for the automotive industry--Fatigue test

GB 11550-1995

汽车座椅头枕性能要求和试验方法

Motor vehicles--Seats head restraints--Performance requirements and test methods

GB 11554-1998

汽车及挂车后雾灯配光性能

Photometric characteristics of rear fog lamp for motor vehicles and their trailers

GB 11555-1994

汽车风窗玻璃除雾系统的性能要求及试验方法

Motor vehicles-Windshield demisters-Performance requirements and test methods

GB 11556-1994

汽车风窗玻璃除霜系统的性能要求及试验方法

Motor vehicles-Windshield defrosters-Performance requirements and test methods

GB 11557-1998

防止汽车转向机构对驾驶员伤害的规定

The stipulation protecting drivers from being injured by motor vehicle steering mechanism

GB 11562-1994

汽车驾驶员前方视野要求及测量方法

Motor vehicles-Forward visibility for drivers-Requirements and measurement methods

GB 11567.1-2001

汽车和挂车侧面防护要求

Motor vehicles and trailers--Lateral protection requirements

广东宏展科技有限公司 - 主营产品: 温度速变试验箱,可程式高低温试验箱,快速温度循环试验箱,环境应力筛选试验箱

地址:广东省东莞市常平镇Lab Companion Park      联系电话:0769-83730866      手机:13662798899     传真:0769-83730860
91化工仪器网 设计制作,未经允许翻录必究 .      Copyright(C) http://www.chem17.com,      All rights reserved. 以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,91化工仪器网对此不承担任何保证责任。
温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。
会员登录
 
 
打赏
[ 新闻资讯搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 违规举报 ]  [ 关闭窗口 ]
免责声明:
本网站部分内容来源于合作媒体、企业机构、网友提供和互联网的公开资料等,仅供参考。本网站对站内所有资讯的内容、观点保持中立,不对内容的准确性、可靠性或完整性提供任何明示或暗示的保证。如果有侵权等问题,请及时联系我们,我们将在收到通知后第一时间妥善处理该部分内容。
 

汽车连接器的国家标准和行业标准是?-技术文章-广东宏展科技有限公司二维码

扫扫二维码用手机关注本条新闻报道也可关注本站官方微信账号:"xxxxx",每日获得互联网最前沿资讯,热点产品深度分析!
 

 
0相关评论